Systèmes
d'essais.

IPX3 – IPX4 – IPX9K Protection Tests According to your needs, we can configure this IP test device along with other IP test devices ( IPX5, IPX6, IPX7, IPX8 ). For information and ordering regarding IPX3 – IPX4 (Oscillating Tube Tester) – IPX9K Protection Tests ,

A fully automated, mobile MIL-STD-810G/H Method 506.6 rain test chamber — Procedure I (Blowing Rain), II (Exaggerated) and III (Drip), run singly, in pairs (I+II / I+III / II+III) or all three. The test item is placed inside the stainless enclosure.

DO-160 Rain (Section 10) Test Device What is the DO-160 Rain Test? The DO-160 standard was developed to test the

IPX3 and IPX4 Spray Nozzles The IPX3 and IPX4 spray nozzles are used in tests that measure the water resistance

IPX5 and IPX6 Water Jet Resistance Tests The IPX5 and IPX6 tests measure the resistance of enclosures to water jets.

Solar Panel Climatic Conditioning Test Device Solar panels must maintain their durability and performance when exposed to various environmental conditions.

DO-160 Humidity Test (Section 6) Device What is the DO-160 Humidity Test? The DO-160 standard was developed to test the

DO-160 Icing / Freezing Test (Section 24) and Test Devices What is the DO-160 Icing / Freezing Test? The DO-160

DO-160 Low Pressure (High Altitude) (Section 4) Test Device What is the DO-160 Low Pressure (High Altitude) Test? The DO-160

MIL-STD-810H (Method 501.7) High Temperature MIL-STD-810G (Method 501.5)Test Machine The MIL-STD-810H (Method 501.7) High Temperature Test Machine is designed to

MIL-STD-810H (Method 507.6) Humidity MIL-STD-810G (Method 507.5) Test Machine The MIL-STD-810H (Method 507.6) Humidity Test Machine evaluates the device’s resistance

MIL-STD-810H (Method 502.7) Low Temperature MIL-STD-810G (Method 502.5) Test Machine The MIL-STD-810H (Method 502.7) Low Temperature Test Machine is designed

MIL-STD-810H (Method 503.7) Temperature Shock MIL-STD-810G (Method 503.5) Test Machine The MIL-STD-810H (Method 503.7) Temperature Shock Test Machine is designed

Climate Test Chambers Since the design of these types of chambers is unique to each user in terms of material and test safety, you can

Conditioning Test Chambers Conditioning Test Chambers are generally used to measure the durability, potential performance issues, and safety of products

IPX5 – IPX6 Dust Test Cabin According to your needs, we can configure this IP test device along with other IP test devices ( IPX3, IPX4, IPX7, IPX8, IPX9 ). For information and ordering regarding IPX5 – IPX6 Dust Test Cabin ,

DO-160 Sand and Dust Test (Section 12) Test Device What is the DO-160 Sand and Dust Test? The DO-160 standard

MIL-STD-810H (Method 510.7) Dust and Sand MIL-STD-810G (Method 510.5) Test Machine The MIL-STD-810H (Method 510.7) Dust and Sand Test Machine

Solar Panel Ultraviolet (UV) Test (IEC 61215) The Solar Panel Ultraviolet (UV) Test is a critical test under the IEC

MIL-STD-810H (Method 500.6) Low Pressure / Altitude MIL-STD-810G (Method 500.5) Test Machine The Low Pressure / Altitude Test Machine (MIL-STD-810H

MIL-STD-810H (Method 516.8) Shock (MIL-STD-810G Method 516.6) Test Machine The MIL-STD-810H (Method 516.8) Shock Test Machine is designed to assess

MIL-STD-810H (Method 505.7) Solar Radiation (Sunlight) Durability MIL-STD-810G (Method 505.5) Test Machine The MIL-STD-810H (Method 505.7) Solar Radiation Durability Test

PV Modules Cyclic Dynamic Mechanical Load Test (IEC TS 62782) The PV Modules Cyclic Dynamic Mechanical Load Test is a

Horizontal Burning Test : UL HB, IEC 60695-11-10, IEC 60707, ISO 1210, GB/T 2408 50W Vertical Burning Test : UL94 V0, V1, V2, IEC 60695-11-10, ISO 1210, GB/T 2408 500W Vertical Burning Test : UL94 5VA, 5VB, IEC 60695-11-20, ISO 9770, GB/T 5169.17 Membrane Material Vertical Burning Test : VTM-0, VTM-1, VTM-2, ISO 9773 Foam Material Horizontal Burning Test : HF-1, HF-2, HBF, ISO 9772, GB/T 8332 The reference standards for horizontal and vertical burning tests include UL94-2006, IEC 60695-11-4, IEC 60695-11-3, GB4943-2001, GB/T5169-2008, IEC60950. The test uses a Bunsen burner of the specified size, with the required ignition gas source (methane or propane). Ignition is applied to the horizontal or vertical specimen at a certain height and angle, periodically. The test evaluates the specimen’s combustibility and fire resistance by measuring ignition time, burn duration, and combustion length.

DO-160 Shock Test (Section 7) Device What is the DO-160 Shock Test? The DO-160 standard was developed to test the

DO-160 Standard Explosive Atmosphere Test (Section 9) Test Device The DO-160 Standard Explosive Atmosphere Test (Section 9) is a test

DO-160 Vibration Test (Section 8) Device What is the DO-160 Vibration Test? The DO-160 standard was developed to test the

Comparative Tracking Index (CTI) Test Device The Comparative Tracking Index (CTI) Test Device is used to determine the tracking resistance

DIN 75200, Figure 5 Horizontal Flammability Test Apparatus | Automotive Interior Materials Horizontal Flammability Test System The DIN 75200, Figure

Glow Wire Test Device The Glow Wire Test Device is used to test the fire resistance of electrical and electronic

Hot Flaming Oil Test Device / Hot Flaming Oil Flammability Test Chamber – IEC 60950 Annex A.3 The Hot Flaming

IEC 60598-1 & IEC 60112 Materials Flame Test Equipment The IEC 60598-1 & IEC 60112 Materials Flame Test Equipment is

IEC-68-2-27 – Section 3.5 Laboratory Shock and Drop Testing Equipment / Mechanical Impact Tester IEC-68-2-27 – Section 3.5 Laboratory Shock

The Needle Flame Test Device is a test method used to evaluate the fire resistance of electrical equipment and materials.

Ball Pressure Test The Ball Pressure Test is used to evaluate the temperature resistance of electrical and electronic materials. The

Vertical Burning Test Device (EN 61386) The Vertical Burning Test Device is designed to evaluate the flammability performance of conduit

IEC 60335-1 Clause 25.14 Figure 8 Power Cord Bending Test Device IEC 60335-1 Clause 25.14 Figure 8 Power Cord Bending

The Charging Gun EV Plug and Connector Cutting Capacity Test Device is a critical testing device for verifying the safety and durability of plugs and connectors used in electric vehicle charging systems. With adjustable cutting force, precise test control, and comprehensive data analysis features, it is an ideal solution for manufacturers, research and development centers, and testing facilities. You can

The IEC 62196-1 Electric Vehicle Charging Plug and Socket Cable Bending Device is a critical test equipment used to verify the mechanical durability of charging equipment in electric vehicle charging stations. With adjustable bending energy, precise test control, and comprehensive data analysis features, it is an ideal solution for manufacturers, research and development centers, and testing facilities. You can

EN200 (Article 14.2) Faucet Life Cycle Test Machine Ensuring the durability and longevity of faucets is essential for user satisfaction

Hydrostatic pressure testing of hoses and pressure components, 10–600 bar.

IEC 60598-1 Clause 4.12.5 Gland Test and Test Device The IEC 60598-1 Clause 4.12.5 Gland Test is a test conducted

IEC 60968-Shape 3 Lamp Bending Moment Test Device The IEC 60968-Shape 3 Lamp Bending Moment Test Device is a testing

Torque testing of lamp holders to IEC 60598 — screw/bayonet caps, CW & CCW

PCL Control LED Light Test Device is a powerful testing tool equipped with the latest technology to verify the performance and safety of LED lights. As LED lighting systems become increasingly common, ensuring their safety and efficiency is essential. The PCL Test Device allows users to verify all parameters of LED lights while also testing their resistance to environmental factors. This provides a significant advantage, especially in quality control processes. You can

IEC 60335-1 Clause 23.3 and 25.14 Power Cord Flexibility Test Device IEC 60335-1 Clause 23.3 and 25.14 Power Cord Flexibility

IEC 60335-2-2 Clause 21.103 Electric Vacuum Cleaner Current-Carrying Hose Bending Test Device The IEC 60335-2-2 Clause 21.103 Electric Vacuum Cleaner

Acceleration test devices are crucial for objectively evaluating the durability and performance of products. These devices help improve product quality and reliability, ensuring compliance with industry standards. Used across various sectors, these test devices contribute to the development of reliable products. For more information about the Acceleration Test Device or to place a custom order tailored to your needs, feel free to

Axial Force Test Device The Axial Force Test Device is a high-precision testing instrument designed to

Burner Flame Test Equipment | IEC 60695-11-4 Figure A.1 The Burner Flame Test Equipment is a testing system used to

IEC 60068 External Mechanical Shock Test Apparatus The IEC 60068 External Mechanical Shock Test is a testing procedure used to

IEC 60068-2-27 Mechanical Shock Test Device The IEC 60068-2-27 Mechanical Shock Test Device is a test system designed to evaluate

IEC 60601-1 Clause 9.8.3.3 Loading Test Machine The IEC 60601-1 Clause 9.8.3.3 Loading Test is a test procedure applied to

For more information or to place an order for the Mandrel Jig Test Machine tailored to your specific testing requirements, feel free to

Repeated free-fall tumbling test for luminaire robustness (IEC 60598)

Water Spray Test Apparatus, IEC 62368-1 Annex Y.5.3 The Water Spray Test Apparatus is a test device used to assess

Torque & bending-moment balance of engaged plugs per IEC 60884-1

Make/break endurance of plugs & socket-outlets under load per IEC 60884-1

Degree-of-damage to flexible-cord conductors at the anchorage per IEC 60884-1

Floor-Type IEC 60884 Clause 24.6 Screw Gland Torque Resistance Power Test Device The IEC 60884-1 Clause 24.6 Screw Gland Torque

Terminal temperature-rise verification for plugs and socket-outlets under rated load.

IEC 60884-1 Figure 20 Flexible Cable Cord Retention Force Test Device IEC 60884-1 Figure 20 Flexible Cable Cord Retention Force

IEC 60884-1 Figure 22-26 Low Energy Vertical Pendulum Hammer Impact Testing Machine for Mechanical Durability Test The IEC 60884-1 Figure

IEC 60884-1 Figure 8 Wire Durability Test Device for Checking the Degree of Damage The IEC 60884-1 Figure 8 Wire

Controlled drop-weight impact on plugs & accessories per IEC 60884-1

Lateral (sideways) loading of plugs in socket-outlets per IEC 60884-1

Plug-from-socket withdrawal force verification per IEC 60884-1

Abrasion resistance of plug-pin insulating sleeves per IEC 60884-1

Repeated swing-arm drop durability of plugs & accessories per IEC 60884-1

Compressive strength of socket-outlet covers & membranes per IEC 60884-1

A MIL-STD-810G/H Method 506.6 walk-in rain test room for large, vehicle-class or drive-in test items — Procedure I (Blowing Rain), II (Exaggerated) and III (Drip), run singly, in pairs (I+II / I+III / II+III) or all three. Built as a fixed installation; sizing is order-specific.

IP Test Room and Water Resistance Tests An IP (Ingress Protection) test room is a specialized testing environment used to

DO-160 Salt Atmosphere Test (Section 14) and Test Devices What is the DO-160 Salt Atmosphere Test? The DO-160 standard was

MIL-STD-810H (Method 509.7) Salt Fog MIL-STD-810G (Method 509.5) Test Machine The MIL-STD-810H (Method 509.7) Salt Fog Test Machine is designed

Dimensional go/no-go gauges for plug and socket-outlet compliance.

IP Probe 41 and 43 Test Probes 41 and 43 are typically used for testing electrical and electronic devices’ protection

IP Test Probe 11 IP Test Probe 11 is designed in accordance with the IEC 61032 standard and is used

IP Test Probe 18 and 19 IP Test Probes 18 and 19 are used to test the protection of electrical

IP Test Probe 31 and 32 IP Test Probes 31 and 32 are used to verify the IP protection ratings

IP Test Probe B (Jointed Test Finger) IP Test Probe B (Jointed Test Finger) is an essential tool used to

IP Test Probe C and D IP Test Probe C and D are essential tools used to validate the design,