Mil STD 810H Rain (Method 506.6) Test Room.

MIL-STD-810HIEC 60529

Обслуживаемые отрасли

Defense Aerospace

A MIL-STD-810G/H Method 506.6 walk-in rain test room for large, vehicle-class or drive-in test items — Procedure I (Blowing Rain), II (Exaggerated) and III (Drip), run singly, in pairs (I+II / I+III / II+III) or all three. Built as a fixed installation; sizing is order-specific.

Applicable StandardMIL-STD-810G/H Method 506.6

Test ProceduresI (Blowing Rain), II (Exaggerated), III (Drip) — single or combined

ConstructionAISI 304 Stainless Steel, 1.5 mm

AccessWalk-in / drive-in

Control SystemPLC + HMI Touch Panel

Measured ParametersPressure (bar), Flow (m³/h), Temperature (°C)

Motor Drives2 (Fan + Pump)

Power Supply3-Phase AC

Запросить предложение →Связаться с инженером

Key Features

AISI 304 stainless steel construction (1.5 mm) — corrosion-resistant and built for long service life.
Procedure I, II and III to MIL-STD-810G/H Method 506.6 — run individually, in pairs (I+II, I+III, II+III) or all three in one programme.
Walk-in / drive-in access for large or vehicle-class test items such as vehicles and motorcycles.
Real-time sensor monitoring of pressure, temperature and flow (m³/h) through calibratable analog inputs.
Intuitive operation via an industrial PLC and a touchscreen HMI.
Data logging and history: date/time, flow, pressure and temperature are recorded on the HMI.
Fixed installation; internal dimensions and spray-head layout are configured per order.

Need a mobile, self-contained unit instead? See the rain test chamber.

/ 01

Стандарты
и методы.

Камеры walk-in

СтандартСсылка

MIL-STD-810HEnvironmental Engineering Considerations and Laboratory Tests

IEC 60529Degrees of Protection Provided by Enclosures (IP Code)

/ 02

Области применения.

Method 506.6 Procedure I
Method 506.6 Procedure II
Method 506.6 Procedure III

/ 03

Технические описания.

EnglishPDF↓TürkçePDF↓

За пределами каталога

ULMEKA проектирует испытательные системы
по техническому заданию.

Если ваше требование выходит за рамки этого каталога — нестандартные размеры камер, интеграция комбинированных стандартов или индивидуальные профили испытаний — обратитесь к нашей инженерной команде.

Связаться с инженером →

/ 04