IEC 61215
PV Module Hail (Ice Ball) Impact Test System (IEC 61215-2, MQT 17).
Fires standard ice balls at a photovoltaic module to verify hail resistance to IEC 61215-2 (MQT 17).
The PV Module Hail Impact Test System performs the hail test of IEC 61215-2 (MQT 17). Moulded ice balls are fired at the module at the speed the standard sets for each ball diameter — 23.0 m/s for the standard 25 mm ball, with larger diameters and higher speeds for more severe climates — striking eleven defined points across cells, edges, corners and mounting areas.
A pneumatic launcher delivers each shot normal to the module surface, and an ice-ball production and cold-storage chain casts and conditions the balls to the required size and temperature. After the impacts the module passes if the glass does not break, there is no major visual defect, power loss stays within the standard limit and the wet-leakage check passes.
ULMEKA designs and manufactures this system. The ball-diameter range, launcher and fixturing are built to the module and the applicable standard; the exact configuration is defined during the quotation stage.
Стандарты
и методы.
Области применения.
- IEC 61215-2 MQT 17 hail test
- PV module hail / impact resistance qualification
- Photovoltaic module type approval
- Solar module test laboratories
ULMEKA проектирует испытательные системы
по техническому заданию.
Если ваше требование выходит за рамки этого каталога — нестандартные размеры камер, интеграция комбинированных стандартов или индивидуальные профили испытаний — обратитесь к нашей инженерной команде.
Связанные
системы.
СМОТРЕТЬ ПОЛНЫЙ КАТАЛОГ →
