Burner Flame Test Equipment | IEC 60695-11-4 Figure A.1
The Burner Flame Test Equipment is a testing system used to evaluate the flammability performance of electrical and electronic devices. Designed in compliance with IEC 60695-11-4, this equipment has been developed to test the combustion behavior of flame-retardant materials and insulation components.
This test system is used to determine the ignition time, flame spread rate, and extinguishing properties of materials when exposed to a flame source. The accuracy and repeatability of the tests are ensured in accordance with the procedures defined in IEC 60695-11-4 Figure A.1.
Main Features
- Burner fully compliant with IEC 60695-11-4 standard
- Precise gas and air adjustment for homogeneous and controlled flame formation
- Calibration-certified measurement systems ensuring reliable test results
- Adjustable flame height and temperature, suitable for various test scenarios
- Non-combustible and insulated test chamber providing a safe test environment
- Automatic timer and flame detection systems for precise data recording
Technical Specifications
- Burner Type: Gas burner compliant with IEC 60695-11-4
- Flame Height: Adjustable between 20 mm – 175 mm
- Flame Temperature: 1000°C ± 50°C (Verified with calibration certificate)
- Gas Source: Methane (99.5% purity)
- Calibration Procedure: Temperature measurement and calibration system compliant with IEC 60695-11-4 Figure A.1
- Test Chamber Size: 600x600x1200 mm (Custom dimensions available upon request)
- Airflow Control: Precisely adjustable with manometer and regulator
- Automatic Data Recording: Integrated system for measuring flame duration, ignition time, and burn time
Application Areas
- Electrical and Electronic Products: Flammability tests for plastic enclosures, cable insulations, and circuit boards
- Automotive Industry: Flammability tests for vehicle insulation materials and plastic components
- Household Appliances and Consumer Products: Flame resistance tests for plastic casings and insulation components of home appliances
- Aerospace and Defense Industry: Combustion tests for cable coatings and polymer materials used in aviation
Standards Covered by the Burner Flame Test Equipment
- IEC 60695-11-4 – Flammability tests for electrical and electronic devices
- IEC 60695-2-10 – Glowing wire flammability test
- UL 94 – Flammability tests for plastic materials
- ISO 4589-2 – Oxygen index flammability test
- ASTM D2863 – Flammability determination using oxygen index testing
- MIL-STD-202H, Method 111 – Flame test for electrical components
Relevant Sections and Figures in the Standards
- IEC 60695-11-4 Figure A.1 – Burner calibration procedure
- UL 94, Section 5.3 – Flame source definitions for vertical and horizontal flammability tests
- ISO 4589-2, Figure 2.4 – Flammability test setup
- MIL-STD-202H, Method 111, Figure 6 – Flame test system compliant with military standards
For more information about Burner Flame Test Equipment | IEC 60695-11-4 Figure A.1, or to place a custom-sized order tailored to your needs, please contact us.
